All iPhone, iPod Touch and iPad models have the same type of headphone jack.
Flag this photo
The iPhone 3G uses a standard audio jack for connecting headphones to the device, which allows you to listen to music, make and receive calls and use the iPhone privately. Several troubleshooting checks should be performed if you experience problems with the headphone jack on your iPhone 3G. Use these steps to pinpoint whether the issue is a hardware, software or accessory fault.Related Searches: Headphone Jack Type
The iPhone 3G has an integrated, 3.5 mm stereo audio jack socket on the upper left edge of the device. Any headphone equipped with a 3.5 mm stereo jack plug can be used with the 3G by inserting the plug fully into the headphone jack socket until it locks in place. Failure to fully insert the plug into the socket can result in loss of stereo and degraded audio quality. The headphone socket on the iPhone 3G has no cover, so check inside for dust or lint that could cause a poor connection.
Inline Microphone
The iPhone 3G is designed to accept headphones with an inline microphone. To achieve this, the bottom connection on the jack plug is split in two, which is automatically detected by the iPhone. If your headphones with an inline microphone use a different connection method than the 3G's standard interface, the microphone will not work. Audio problems could also be introduced if you are using an incompatible headset, even though the jack plug appears to connected correctly to the iPhone 3G.
Reboot or Reset Your iPhone 3G
A fault on the iPhone's audio jack output isn't necessarily a hardware problem. IPhone users have reported issues such as low volume, missing stereo channels and poor audio quality as a result of an operating system fault. Hold the iPhone's "Sleep/Wake" button for three seconds and slide the on-screen "Slide to power off" button to the right to shut the device down if you are experiencing audio problems from the headphone jack. Press the "Sleep/Wake" button again after one minute to turn the iPhone back on. In many cases, this will resolve the audio problem. This step should be performed before repairing or returning the iPhone.
Test Headphones
Wear and tear can take a toll on a headphone's jack plug as the result of it being repeatedly inserted and removed from jack sockets. Rotating the plug when it is connected to the iPhone 3G with music playing can indicate if one side of the plug is worn and no longer makes a solid contact. Broken wires within the cable can also present as degraded audio. Connect the headphones to an alternative music player to test them. If the problem persists, the fault is with the headphones rather than the iPhone 3G's socket.
ReferencesRyanSpoon.com: iPhone Headphones Jack Problems… Here’s How to FixYouTube: How to Solve: iPhone 4 Headphone Jack ProblemPhoto Credit Hemera Technologies/AbleStock.com/Getty ImagesRead Next: Print this articleCommentsFollow eHowFollow
View the
Original article
he Sony MDR-RF925RK wireless headphones system gives you the ability to move up to 150 feet from a sound source and still maintain exceptional sound quality.The MDR-RF925RK offers 900MHz RF wireless transmission and FM stereo sound while the headphones deliver music to your ears for up to 15 hours on a full battery charge.Housing a 40mm driver unit and easy to reach control buttons, the MDR-RF925RK wireless headphones provides a powerful and easy connection to stereos, televisions, mp3 players, and just about any audio sound source.
Sennheiser RS170 Wireless Headphones
Sony MDR-RF970RK Wireless Stereo Headphone MDRRF970RK Headphones & Earphones
